EV Charger Installation Templestowe

Switchboard Assessment Included. Lifetime Workmanship Guarantee.

Bitz Electrical installs home and commercial EV chargers across Templestowe and the surrounding Manningham area, including Templestowe Lower, Doncaster East and Bulleen. Every installation includes a full switchboard assessment, a dedicated circuit and a compliant setup for all major vehicle brands, backed by a written quote before we start and a lifetime workmanship guarantee.

🏆Lifetime Workmanship Guarantee
Consistent 5-Star Google Rating
25+ Years Experience
🛡️Licensed & Insured
🔍Switchboard Assessment Included

Get a Free Quote

What The Locals Say

EV Charger Installation Templestowe

Home EV Charger Installation

A dedicated AC wall charger draws from its own circuit, charges far faster than a standard outlet, and is built for the sustained overnight load an EV places on the system. We assess your property's electrical setup before recommending a charger and handle any switchboard work required as part of the same job.

What's Included in Every Quote

Before recommending a charger we assess your switchboard capacity, supply type and cable route. Templestowe is a suburb of large blocks and long driveways, and much of the housing stock dates from the 1970s and 1980s subdivision of the old orchard land, so ceramic fuse boards and early circuit breaker panels are still common. Split level homes on the sloping ground toward Ruffey Lake Park and the Yarra often need a longer cable run from the board to a detached garage or carport. Where an upgrade or a longer run is required, we include it in the written quote from the start, one job, one visit, no surprises.

Commercial EV Charger Installation in Templestowe

The Templestowe Village strip along Anderson Street and James Street, along with the medical suites, offices and cafes serving the wider Manningham area, are increasingly fitting customer and staff charging. We handle single and multi-bay commercial installations including load management planning for sites where multiple vehicles charge simultaneously.

Home EV Charging Speeds: What the Numbers Look Like

The difference between a standard power point and a dedicated wall charger is significant in practice. Here is how the three main options compare for a typical 70kWh battery:

Charging Method Output Charge Time (70kWh Battery)
Standard power point (10A) 2.4kW 24–30 hours
7kW Type 2 wall charger (single phase) 7kW 8–10 hours
22kW wall charger (three phase) 22kW 3–4 hours

Most Templestowe homes are single-phase, so a 7kW wall charger is the standard recommendation. Three-phase supply does turn up more often here than in newer estates, particularly on larger properties with pools, ducted air conditioning or a workshop already running heavy loads. Where it is present, a 22kW charger will charge in roughly a third of the time. We confirm your supply type as part of every assessment.

Switchboard Assessment Included With Every Quote

An EV charger draws a sustained high load and your switchboard needs to handle it safely. We assess yours as part of every quote at no charge, checking spare capacity, RCD compliance and cable route before recommending anything.

Templestowe's housing stock is dominated by 1970s and 1980s builds on the former orchard subdivisions, and a good number of those homes still run their original ceramic fuse boards or early circuit breaker panels with no safety switch protection at all. Where a board has already been upgraded, it has often been done piecemeal over the years and is now full, with no spare ways left for a dedicated charger circuit. A switchboard upgrade is a genuine possibility here rather than an afterthought. Where one is required, we include it in the quote from the start. No surprises on the day, no second invoice, and every installation comes with a Certificate of Electrical Safety on completion.

For full details on switchboard upgrades, or to learn more about our EV charger installation services across Melbourne's north east, see below.

Ready to Install Your EV Charger in Templestowe?

We assess your switchboard, recommend the right charger for your vehicle and property, and complete the full installation in a single visit. Lifetime workmanship guarantee included.

EV Chargers We Install in Templestowe

These are the chargers we install most often, but we can install any brand or model, including one you already own.

Tesla Wall Connector

Up to 11kW on single-phase. Installed to Tesla's specifications with a dedicated circuit and app integration.

Zappi Solar Charger

The standout choice for solar households. Charges from surplus solar generation rather than drawing from the grid.

Wallbox Pulsar Plus

Compact and reliable. Popular with Kia, Hyundai, MG, Volvo and Polestar owners. App scheduling included.

Evnex

Built for the Australian market. Straightforward home charging with app connectivity and off-peak scheduling.

Universal Type 2 Chargers

Compatible with BYD, Mitsubishi PHEV, Mercedes, BMW, Audi and all other Type 2 vehicles sold in Australia.

Not sure which charger suits your vehicle?
Tell us what you drive and we will give you a straight recommendation.

Mounting and Installation Options

We install wall-mounted and post-mounted chargers across all property types in Templestowe. Cable routing is planned before installation starts and we work to minimise visible conduit where the installation allows.

Detached garages, long driveways and split level homes are common across Templestowe, and each changes how the cable is routed. Post-mounted units suit properties where the parking space sits well away from the house, while wall-mounted chargers work best where the garage is attached or the switchboard is close to the driveway. Single and double garages, carports, external walls and freestanding driveway posts are all setups we handle regularly across Templestowe and the wider Manningham area.

EV Charging and Solar

Templestowe's large blocks and generous roof areas make it well suited to solar, and retrofitted systems are common on homes that predate rooftop solar entirely. Households with a decent north-facing array often generate substantial midday surplus, which makes solar-integrated charging worth planning for rather than adding later.

A charger such as the Zappi charges your vehicle from surplus solar generation rather than drawing from the grid. We advise on solar integration as part of every quote.

Installation Cost in Templestowe

Most residential installations in Templestowe fall in the range of $900 to $2,200. Longer cable runs to detached garages and older switchboards needing attention are the two factors that most often push a Templestowe job toward the upper end. The main variables are:

  • The charger being installed
  • Distance from switchboard to installation point
  • Available electrical capacity
  • Whether a switchboard upgrade is required
  • Single-phase or three-phase supply
  • Cable access and complexity
Call 1300 215 193 for a written quote →

The EV Charger Installation Process

01

Assessment and Quote

We assess your switchboard capacity, available circuits, supply type and cable route and give a straight charger recommendation for your vehicle. You receive a written quote covering all work before anything starts.

02

Installation

The full job is completed in a single visit where the scope allows: charger mounted, cabling run and connected, switchboard connection made, and circuit protection installed. We work neatly and leave the site clean.

03

Testing and Handover

We test the charger through a full cycle, confirm circuit protection is working, and walk you through daily operation and off-peak scheduling. A Certificate of Electrical Safety is issued on completion.

04

Ongoing Support

Our lifetime workmanship guarantee covers the installation. If anything is ever wrong with our work, we come back and fix it. We remain available for questions, faults and follow-up work.

EV Charger Installation Across Manningham and the North East

We install EV chargers regularly across Templestowe and the surrounding Manningham area. The suburbs below are part of our regular run.


Related Services in Templestowe

 

Get a Quote for EV Charger Installation in Templestowe

Tell us about your property and vehicle and we will come out, assess your switchboard and installation options, and provide a written quote with no obligation. Most enquiries hear back from us the same day.

Call 1300 215 193 or send us a message.

Get a Free Quote

Tell us about the job and we will get back to you, usually the same day.
Optional. Photos of the switchboard, fitting or area help us quote accurately.

EV Charger Installation Templestowe: Frequently Asked Questions

How much does EV charger installation cost in Templestowe?

Most residential installations in Templestowe fall between $900 and $2,200. Two factors push Templestowe jobs toward the upper end more often than in newer suburbs: long cable runs from the switchboard to a detached garage, and older switchboards that need attention before a dedicated circuit can be added. You receive a written quote before any work starts, with no variations added later.

Do I need a switchboard upgrade in Templestowe before installing an EV charger?

More often here than in newer suburbs, yes. Much of Templestowe's housing dates from the 1970s and 1980s orchard subdivisions, and a good number of those homes still run original ceramic fuse boards or early circuit breaker panels without safety switch protection. Others have been upgraded piecemeal over the years and are now full, with no spare ways for a dedicated charger circuit. We assess your board free as part of every quote and include any upgrade in the written quote from the start.

What type of EV charger suits a Templestowe home?

For most Templestowe homes a 7kW Type 2 wall charger is the right choice. It is compatible with virtually all EVs sold in Australia, delivers a full overnight charge for most vehicles, and works on standard single-phase supply. Three-phase supply turns up more often in Templestowe than in newer estates, particularly on larger properties already running a pool, ducted air conditioning or a workshop, and where it exists a 22kW charger will charge in roughly a third of the time. If you have solar panels, a Zappi is worth a close look.

My garage is detached and a long way from the switchboard. Can you still install a charger?

Yes, and it is one of the most common situations we deal with in Templestowe. Long driveways and detached garages set well back from the street are a defining feature of the suburb, and cable runs of 20 to 40 metres are routine. Longer runs need a larger cable size to manage voltage drop, which is priced into the written quote. Where the garage sits too far from the house, a post-mounted charger closer to the parking space is often the cleaner solution.

How long does EV charger installation take?

Most residential installations are completed in a single visit of three to six hours. Templestowe jobs sit toward the longer end more often than in newer suburbs, because of longer cable runs and older switchboards that take more care to work on safely. If a switchboard upgrade is needed, allow additional time on the day. We give you a clear timeframe as part of the quote.

Is Templestowe the same as Templestowe Lower?

They are two separate suburbs. Templestowe is postcode 3106 and sits north and east, taking in the area around Templestowe Village and running toward the Yarra. Templestowe Lower is postcode 3107 and sits to the south and west, closer to Bulleen and the Eastern Freeway. We install EV chargers in both, and both fall within the City of Manningham. If you are unsure which one your property sits in, call 1300 215 193 and we will confirm.

Which EV charger brands do you install in Templestowe?

We install customer-supplied chargers and can supply units directly. Brands we regularly install include Tesla Wall Connector, Zappi, Wallbox Pulsar Plus, Evnex and universal Type 2 chargers. If you have a specific charger in mind, contact us to confirm compatibility with your vehicle and property.

Can I install an EV charger myself in Victoria?

No. EV charger installation is regulated electrical work in Victoria and must be carried out by a licensed electrician. DIY installation is illegal, voids the charger warranty, may void your home insurance, and creates a genuine safety risk given the sustained load involved. A Certificate of Electrical Safety is required on completion and can only be issued by a licensed electrical contractor.

Can you install two EV chargers at one Templestowe property?

Yes. Templestowe has one of the higher rates of two-car and three-car households in Melbourne's north east, largely because there is no train station in the suburb and most trips are made by car. Two chargers on a single-phase supply usually require dynamic load management, which shares the available capacity between the two vehicles rather than tripping the main switch. On three-phase supply, two chargers are more straightforward. We plan the load calculation before quoting.

Can my EV charger integrate with my solar system?

Yes, if you choose a solar-compatible charger such as the Zappi. It monitors your solar output and charges from surplus solar generation before drawing from the grid. Templestowe's large blocks and generous north-facing roof areas mean many households generate substantial midday surplus, which makes solar diversion genuinely worthwhile rather than marginal. We advise on this during the quote process.

Should I charge my EV overnight on an off-peak tariff?

For most Templestowe households without solar, yes. Off-peak rates typically run from around 11pm to 7am and can be less than half the peak rate, which on a 70kWh battery is a meaningful saving per full charge. Every charger we install supports scheduled charging through its app, so you set the window once and forget it. Solar households often do the reverse and charge midday from surplus generation instead.

What does a compliant EV charger installation include?

A compliant installation includes a dedicated circuit from the switchboard to the charger, correct RCD or RCBO protection in line with AS/NZS 3000, a correct earth connection, weatherproof installation where required, and a Certificate of Electrical Safety on completion. We include all of this as standard, along with a lifetime workmanship guarantee.

Which EV makes and models do you install chargers for?

We install chargers for all EVs sold in Australia: Tesla Model 3 and Model Y, BYD Atto 3 and Seal, Kia EV6, Hyundai Ioniq 5 and 6, MG ZS EV, Volvo EX40, Polestar 2, Mitsubishi Outlander PHEV, Mercedes EQA and EQC, BMW iX and i4, Audi Q4 e-tron, and others.

Do I even need a wall charger, or is a normal power point enough?

A standard 10A power point delivers around 2.4kW and takes 24 to 30 hours to fill a 70kWh battery, which is workable only for short daily commutes. A 7kW wall charger does the same job in 8 to 10 hours, comfortably overnight. Templestowe's distance from the train network means most residents drive further each day than inner suburban EV owners, which makes a dedicated charger the practical choice rather than a luxury.

Do you install EV chargers for businesses in Templestowe?

Yes. The Templestowe Village strip along Anderson Street and James Street, along with medical suites, offices and cafes across the wider Manningham area, are increasingly fitting customer and staff charging. We handle single and multi-bay commercial installations, including load management planning for sites where several vehicles charge at once. Body corporate and apartment installations are also within scope.

Do you need to inspect the property before quoting?

We can give a general indication of cost over the phone, but a written quote requires us to see your switchboard and confirm the cable route. This matters more in Templestowe than in most suburbs, because the cable run and the age of the board are the two variables that move the price most. Call 1300 215 193 to arrange an assessment.

Does an EV charger add value when selling a Templestowe home?

A properly installed, compliant charger with its Certificate of Electrical Safety is a genuine selling point in a suburb where nearly every household runs at least two cars and EV uptake is climbing. Buyers increasingly ask whether the switchboard can support a charger, and being able to answer that with a completed installation and paperwork removes an objection before it forms. An unpermitted or non-compliant install has the opposite effect and can hold up a sale.

Do you service Doncaster East, Bulleen and nearby suburbs?

Yes. We service Templestowe (3106), Templestowe Lower, Doncaster, Doncaster East, Donvale, Bulleen, Warrandyte and Park Orchards across the City of Manningham, along with the Banyule suburbs across the Yarra. If you are unsure whether we cover your location, call 1300 215 193.

Why does Templestowe need a different approach to EV charger installation?

Templestowe was subdivided out of orchard land largely through the 1970s and 1980s, which produced a suburb of large blocks, long driveways, split level homes and detached garages set back from the street. Three things follow from that: cable runs are longer than average, switchboards are older than average, and the sloping ground toward Ruffey Lake Park and the Yarra can complicate the route between the board and the parking space. An installer who quotes Templestowe the way they quote a new estate will get the price wrong. We assess each property before quoting for exactly this reason.