EV Charger Installation Bulleen
Switchboard Assessment Included. Lifetime Workmanship Guarantee.
Bitz Electrical installs home and commercial EV chargers across Bulleen and the surrounding Manningham area. Every installation includes a full switchboard assessment, a dedicated circuit and a compliant setup for all major vehicle brands, backed by a written quote with no variations before we start and a lifetime workmanship guarantee.

Get a Free Quote
What The Locals Say
EV Charger Installation Bulleen
Home EV Charger Installation
A dedicated AC wall charger draws from its own circuit, charges far faster than a standard outlet, and is built for the sustained overnight load an EV places on the system. We assess your property's electrical setup before recommending a charger and handle any switchboard work required as part of the same job.
What's Included in Every Quote
Before recommending a charger we assess your switchboard capacity, supply type and cable route. Many Bulleen homes were built through the 1960s and 70s brick veneer boom and can need a board upgrade to safely support EV charging. Where one is required we include it in the written quote from the start, one job, one visit, no surprises.
Commercial EV Charger Installation in Bulleen
Bulleen Plaza and the surrounding commercial strip along Manningham Road are well placed to benefit from EV charging infrastructure for staff and customers. We handle single and multi-bay commercial installations including load management planning for sites where multiple vehicles charge simultaneously.
Home EV Charging Speeds: What the Numbers Look Like
The difference between a standard power point and a dedicated wall charger is significant in practice. Here is how the three main options compare for a typical 70kWh battery:
| Charging Method | Output | Charge Time (70kWh Battery) |
|---|---|---|
| Standard power point (10A) | 2.4kW | 24–30 hours |
| 7kW Type 2 wall charger (single phase) | 7kW | 8–10 hours |
| 22kW wall charger (three phase) | 22kW | 3–4 hours |
Most Bulleen homes are single-phase, so a 7kW wall charger is the standard recommendation. Properties with three-phase supply can run a 22kW charger and charge in roughly a third of the time. We confirm your supply type as part of every assessment.
Switchboard Assessment Included With Every Quote
An EV charger draws a sustained high load and your switchboard needs to handle it safely. We assess yours as part of every quote at no charge — checking spare capacity, RCD compliance and cable route before recommending anything.
Bulleen's housing stock is a real mix. The established streets around the Veneto Club and Bulleen Park are predominantly 1960s and 1970s brick veneer, and boards from this era commonly have limited spare capacity or missing safety switch protection. Closer to the Manningham Road corridor and around Trin Warren Tam-boore, newer townhouse and unit developments are far more common, with modern boards that typically need no upgrade at all. If your board needs work, we include it in the quote from the start. No surprises on the day, no second invoice. We handle both in a single visit.
Do I Need a Switchboard Upgrade for an EV Charger in Bulleen?
It depends significantly on which part of Bulleen you're in. Newer townhouse and unit developments are unlikely to need any board work. Original 1960s and 1970s brick veneer homes on the established streets are more likely to need attention. We assess this at the quoting stage and give you a clear answer before any commitment is made.
For full details on switchboard upgrades including pricing, process and what to expect, or to learn more about our EV charger installation services across Melbourne's north east, see below.
Ready to Install Your EV Charger in Bulleen?
We assess your switchboard, recommend the right charger for your vehicle and property, and complete the full installation in a single visit. Lifetime workmanship guarantee included.
EV Chargers We Install in Bulleen
These are the chargers we install most often, but we can install any brand or model, including one you already own.
Tesla Wall Connector
Up to 11kW on single-phase. Installed to Tesla's specifications with a dedicated circuit and app integration.
Zappi Solar Charger
The standout choice for solar households. Charges from surplus solar generation rather than drawing from the grid.
Wallbox Pulsar Plus
Compact and reliable. Popular with Kia, Hyundai, MG, Volvo and Polestar owners. App scheduling included.
Evnex
Built for the Australian market. Straightforward home charging with app connectivity and off-peak scheduling.
Universal Type 2 Chargers
Compatible with BYD, Mitsubishi PHEV, Mercedes, BMW, Audi and all other Type 2 vehicles sold in Australia.
Mounting and Installation Options
We install wall-mounted and post-mounted chargers across all property types in Bulleen. Cable routing is planned before installation starts and we work to minimise visible conduit where the installation allows.
Single and double garages, carports, external walls and freestanding post-mounted units for driveways are all setups we handle regularly across Manningham and the wider north east.
EV Charging and Solar
Solar uptake in Bulleen is consistent with the broader north east Melbourne trend, with strong adoption among owner-occupiers and the newer townhouse developments along the Manningham Road corridor. Pairing solar with a compatible EV charger makes sound financial sense for households generating meaningful midday surplus.
A charger such as the Zappi charges your vehicle from surplus solar generation rather than drawing from the grid. We advise on solar integration as part of every quote.
Installation Cost in Bulleen
Most residential installations in Bulleen fall in the range of $800 to $1,800. The main variables are:
- The charger being installed
- Distance from switchboard to installation point
- Available electrical capacity
- Whether a switchboard upgrade is required
- Single-phase or three-phase supply
- Cable access and complexity
The EV Charger Installation Process
Assessment and Quote
We assess your switchboard capacity, available circuits, supply type and cable route and give a straight charger recommendation for your vehicle. You receive a written quote covering all work before anything starts.
Installation
The full job is completed in a single visit where the scope allows: charger mounted, cabling run and connected, switchboard connection made, and circuit protection installed. We work neatly and leave the site clean.
Testing and Handover
We test the charger through a full cycle, confirm circuit protection is working, and walk you through daily operation and off-peak scheduling. A Certificate of Electrical Safety is issued on completion.
Ongoing Support
Our lifetime workmanship guarantee covers the installation. If anything is ever wrong with our work, we come back and fix it. We remain available for questions, faults and follow-up work.
EV Charger Installation Across Manningham
We install EV chargers regularly across Bulleen and the surrounding Manningham corridor. The suburbs below are part of our regular run.
For a full list of suburbs we cover, visit the EV Charger Installation Melbourne page.
Servicing Bulleen and the Surrounding Corridor.
Lifetime workmanship guarantee on every installation. No travel surcharges across Bulleen and surrounding suburbs.
Call 1300 215 193
Get a Quote for EV Charger Installation in Bulleen
Tell us about your property and vehicle and we will come out, assess your switchboard and installation options, and provide a written quote with no obligation. Most enquiries hear back from us the same day.
Call 1300 215 193 or send us a message.
Get a Free Quote
EV Charger Installation Bulleen: Frequently Asked Questions
How much does EV charger installation cost in Bulleen?
Most residential installations in Bulleen fall between $800 and $1,800. The range depends on the charger you choose, the cable run distance, available electrical capacity, and whether a switchboard upgrade is required. Newer townhouse and unit developments around Manningham Road typically sit at the lower end of that range, while original brick veneer homes on the established streets may need a board upgrade, which is included in the written quote from the start. Call 1300 215 193 for a no-obligation assessment.
Do I need a switchboard upgrade in Bulleen before installing an EV charger?
It depends on which part of Bulleen you're in. Newer townhouse and unit developments closer to Manningham Road and Trin Warren Tam-boore have modern boards that typically need no upgrade at all. Original 1960s and 1970s brick veneer homes on the established streets around Bulleen Park and the Veneto Club are more likely to have boards with limited spare capacity or missing safety switch protection. We assess this as part of every quote and include any required work upfront.
What type of EV charger suits a Bulleen home?
For most Bulleen homes, a 7kW Type 2 wall charger is the right choice. It's compatible with virtually all EVs sold in Australia, delivers a full overnight charge for most vehicles, and works on standard single-phase supply, which is what the majority of Bulleen properties run. If your property has three-phase power, a 22kW charger charges significantly faster. If you have solar panels, a Zappi is worth a close look. Tell us your vehicle and we'll give you a straight recommendation.
How long does EV charger installation take?
Most residential installations in Bulleen are completed in a single visit of three to six hours. If a switchboard upgrade is also required, allow a full day. We give you a clear timeframe as part of the quote.
Which EV charger brands do you install in Bulleen?
We install customer-supplied chargers and can supply units directly. Brands we regularly install include Tesla Wall Connector, Zappi, Wallbox Pulsar Plus, Evnex and universal Type 2 chargers. If you have a specific charger in mind, contact us to confirm compatibility with your vehicle and property.
Can I install an EV charger myself in Victoria?
No. EV charger installation is regulated electrical work in Victoria and must be carried out by a licensed electrician. DIY installation is illegal, voids the charger warranty, may void your home insurance, and creates a genuine safety risk given the sustained load involved. A Certificate of Electrical Safety is required on completion and can only be issued by a licensed electrical contractor.
Do you service Doncaster, Templestowe and nearby suburbs?
Yes. We service Bulleen (3105), Doncaster, Templestowe, Templestowe Lower, Ivanhoe, Rosanna and Heidelberg as part of our regular Manningham run. If you're unsure whether we cover your location, call 1300 215 193.
Can my EV charger integrate with my solar system?
Yes, if you choose a solar-compatible charger such as the Zappi. It monitors your solar output and charges from surplus solar generation before drawing from the grid. The practical benefit depends on your system size and daily driving pattern. We advise on this during the quote process.
What does a compliant EV charger installation include?
A compliant installation includes a dedicated circuit from the switchboard to the charger, correct RCD or RCBO protection in line with AS/NZS 3000, a correct earth connection, weatherproof installation where required, and a Certificate of Electrical Safety on completion. We include all of this as standard.
Which EV makes and models do you install chargers for?
We install chargers for all EVs sold in Australia: Tesla Model 3 and Model Y, BYD Atto 3 and Seal, Kia EV6, Hyundai Ioniq 5 and 6, MG ZS EV, Volvo EX40, Polestar 2, Mitsubishi Outlander PHEV, Mercedes EQA and EQC, BMW iX and i4, Audi Q4 e-tron, and others.
Do you need to inspect the property before quoting?
We can give a general indication of cost over the phone, but a firm written quote requires us to see your switchboard and confirm the cable route. For most Bulleen properties we can schedule an assessment quickly. Call 1300 215 193 to arrange a time.
Why is Bulleen well suited to home EV charging?
Bulleen sits along the Koonung Creek corridor in Manningham, close to the Eastern Freeway and within easy reach of the Doncaster and Box Hill employment hubs, making it a natural fit for daily commuters switching to electric vehicles. The suburb's mix of original 1960s and 1970s brick veneer family homes and newer townhouse developments means most properties have a garage or carport suited to a dedicated wall charger, and a growing number of households are already running rooftop solar. We're installing chargers in Bulleen and the surrounding Manningham suburbs regularly.