EV Charger Installation Templestowe Lower
Switchboard Assessment Included. Lifetime Workmanship Guarantee.
A professionally installed EV charger is faster, safer and purpose-built for the load an EV draws every night. Bitz Electrical installs home and commercial EV chargers across Templestowe Lower, Templestowe, Doncaster, Bulleen, Lower Plenty and surrounding Manningham suburbs, including dedicated circuits, switchboard assessments and compliant installations for all major vehicle brands.
Get a Free Quote
Templestowe Lower's housing stock is predominantly 1970s and 1980s brick — well-built homes on good blocks, but wired to the standards of their era. Those standards were not designed for the sustained overnight load of an EV charger, and switchboards from this period frequently require attention before installation can proceed.
Bitz Electrical services Templestowe Lower (3107), Templestowe, Doncaster, Bulleen, Lower Plenty and surrounding suburbs regularly. We assess your switchboard as part of every quote so you know exactly what is involved before committing to anything.
EV Charger Installation Templestowe Lower
Home EV Charger Installation
A dedicated AC wall charger draws from its own circuit, charges far faster than a standard outlet, and is built for the sustained overnight load an EV places on the system. We assess your property's electrical setup before recommending a charger and handle any switchboard work required as part of the same job.
Switchboard Considerations in Templestowe Lower
Most homes in Templestowe Lower were built in the 1970s and 1980s and carry switchboards from that era — typically with limited spare capacity and in many cases without adequate RCD protection. These boards were not designed for modern household demand, let alone the load of an EV charger. We assess the board as part of every quote and include any required upgrade upfront, with no surprises on the day.
Commercial EV Charger Installation
Macedon Square, Macedon Plaza and the surrounding commercial precinct are well positioned for EV charging infrastructure for staff and customers. We handle single and multi-bay commercial installations including load management planning for sites where multiple vehicles charge simultaneously.
Home EV Charging Speeds: What the Numbers Look Like
The difference between a standard power point and a dedicated wall charger is significant in practice. Here is how the three main options compare for a typical 70kWh battery:
| Charging Method | Output | Charge Time (70kWh Battery) |
|---|---|---|
| Standard power point (10A) | 2.4kW | 24–30 hours |
| 7kW Type 2 wall charger (single phase) | 7kW | 8–10 hours |
| 22kW wall charger (three phase) | 22kW | 3–4 hours |
Most Templestowe Lower homes are single-phase, so a 7kW wall charger is the standard recommendation. Properties with three-phase supply can run a 22kW charger and charge in roughly a third of the time. We confirm your supply type as part of every assessment.
Switchboard Assessment Included With Every Quote
An EV charger draws a sustained high load — more than almost anything else connected to your home — and your switchboard needs to handle it safely before installation can proceed.
We assess your switchboard as part of every quote at no charge. We check for a spare circuit with adequate capacity, confirm your RCD protection is compliant with AS/NZS 3000, and identify whether any upgrades are required before we start. Templestowe Lower's 1970s and 1980s housing stock means this check is particularly important — boards from this era commonly have limited spare capacity, missing safety switches, and in some cases ceramic fuse holders that are not suitable for a charger load.
If your board needs work, we include it in the quote from the start. No surprises on the day, no second invoice, no need to book a separate electrician. We handle both in a single visit.
Do I Need a Switchboard Upgrade for an EV Charger in Templestowe Lower?
Not necessarily. Some Templestowe Lower homes have had full or partial board upgrades and have a spare circuit with sufficient capacity. Properties that still have original boards from the 1970s are more likely to need work. We assess this at the quoting stage and give you a clear answer before any commitment is made.
Ready to Install Your EV Charger in Templestowe Lower?
We assess your switchboard, recommend the right charger for your vehicle and property, and complete the full installation in a single visit. Lifetime workmanship guarantee included.
EV Chargers We Install in Templestowe Lower
Tesla Wall Connector
Up to 11kW on single-phase. Installed to Tesla's specifications with a dedicated circuit and app integration.
Zappi Solar Charger
The standout choice for solar households. Charges from surplus solar generation rather than drawing from the grid.
Wallbox Pulsar Plus
Compact and reliable. Popular with Kia, Hyundai, MG, Volvo and Polestar owners. App scheduling included.
Evnex
Built for the Australian market. Straightforward home charging with app connectivity and off-peak scheduling.
Universal Type 2 Chargers
Compatible with BYD, Mitsubishi PHEV, Mercedes, BMW, Audi and all other Type 2 vehicles sold in Australia.
EV Charger Mounting and Installation Options
We install wall-mounted and post-mounted chargers across a range of property types in Templestowe Lower. Cable routing is planned before installation starts and we work to minimise visible conduit where the installation allows. Single and double garages, carports, external walls and freestanding post-mounted units for driveways are all setups we handle regularly across the Manningham area.
EV Charging and Solar in Templestowe Lower
Solar uptake in Templestowe Lower has been consistent with broader Manningham trends — strong, driven by the suburb's large roof areas, high owner-occupancy and the economics of self-consumption. Pairing a solar system with a solar-compatible EV charger is a natural next step. A charger such as the Zappi monitors your solar output in real time and charges your vehicle from surplus generation rather than drawing from the grid, using energy that would otherwise be exported at a low feed-in tariff.
For households that are home during the day or have a larger rooftop system with meaningful midday surplus, the saving over time is significant. We advise on solar-compatible chargers and whether the setup makes sense for your usage pattern as part of every quote.
EV Charger Installation Cost in Templestowe Lower
Most residential EV charger installations in Templestowe Lower fall in the range of $800 to $1,800 depending on the scope of work involved. The main variables are:
- The charger being installed
- Distance from the switchboard to the installation point
- Available electrical capacity and existing circuit condition
- Whether a switchboard upgrade is required
- Single-phase or three-phase supply
- Cable access and installation complexity
The 1970s and 1980s housing stock in Templestowe Lower means a switchboard upgrade is more commonly part of the job than in suburbs with newer builds. Where that is the case, we include it in the quote from the start.
We give you a written quote covering all work before anything starts. Call 1300 215 193 or use the form below to arrange an assessment.
The EV Charger Installation Process
Assessment and Quote
We assess your switchboard capacity, available circuits, supply type and cable route and give a straight charger recommendation for your vehicle. You receive a written quote covering all work before anything starts.
Installation
The full job is completed in a single visit where the scope allows: charger mounted, cabling run and connected, switchboard connection made, and circuit protection installed. We work neatly and leave the site clean.
Testing and Handover
We test the charger through a full cycle, confirm circuit protection is working, and walk you through daily operation and off-peak scheduling. A Certificate of Electrical Safety is issued on completion.
Ongoing Support
Our lifetime workmanship guarantee covers the installation. If anything is ever wrong with our work, we come back and fix it. We remain available for questions, faults and follow-up work.
What The Locals Say
EV Charger Installation Across Melbourne's North East
We install EV chargers regularly across Templestowe Lower and the surrounding Manningham and Banyule corridor. All suburbs below are part of our regular run.
Templestowe | Doncaster | Bulleen | Ivanhoe | Heidelberg | Montmorency | Greensborough | Eltham | Lower Plenty | Diamond Creek | Viewbank | Macleod
For a full list of suburbs we cover, visit the EV Charger Installation Melbourne page.
Servicing Templestowe Lower and the Manningham Corridor.
Lifetime workmanship guarantee on every installation. No travel surcharges across Templestowe Lower and surrounding suburbs.
Call 1300 215 193
Get a Quote for EV Charger Installation in Templestowe Lower
Tell us about your property and vehicle and we will come out, assess your switchboard and installation options, and provide a written quote with no obligation. Most enquiries hear back from us the same day.
Call 1300 215 193 or send us a message.
Get a Free Quote
Frequently Asked Questions
How much does EV charger installation cost in Templestowe Lower?
Most residential installations in Templestowe Lower fall between $800 and $1,800. The range depends on the charger, cable run distance, available electrical capacity, and whether a switchboard upgrade is required. The suburb's 1970s and 1980s housing stock means a board upgrade is more commonly part of the job than in suburbs with newer builds. We give you a written quote covering all work before anything starts. Call 1300 215 193 for a no-obligation assessment.
Do I need a switchboard upgrade before installing an EV charger in Templestowe Lower?
Not necessarily, but it is more common here than in newer suburbs. Many homes in Templestowe Lower were built in the 1970s and 1980s and still have original boards with limited spare capacity and in some cases no safety switch protection. We assess this as part of every quote and include any required work upfront — no separate invoice, no surprises on the day.
What type of EV charger suits a Templestowe Lower home?
For most Templestowe Lower homes, a 7kW Type 2 wall charger is the right choice. It is compatible with virtually all EVs sold in Australia, delivers a full overnight charge for most vehicles, and works on standard single-phase supply. If your property has three-phase power, a 22kW charger charges significantly faster. If you have solar panels, a Zappi is worth a close look. Tell us your vehicle and we will give you a straight recommendation.
How long does EV charger installation take?
Most residential installations are completed in a single visit of three to six hours. If a switchboard upgrade is also required, allow a full day. We give you a clear timeframe as part of the quote.
Which EV charger brands do you install in Templestowe Lower?
We install customer-supplied chargers and can supply units directly. Brands we regularly install include Tesla Wall Connectors, Zappi, Evnex, Wallbox, Ocular, ZJ Beny and Fronius Wattpilot. If you have a specific charger in mind, contact us to confirm compatibility with your vehicle and property.
Can I install an EV charger myself in Victoria?
No. EV charger installation is regulated electrical work in Victoria and must be carried out by a licensed electrician. DIY installation is illegal, voids the charger warranty, may void your home insurance, and creates a genuine safety risk given the sustained load involved. A Certificate of Electrical Safety is required on completion and can only be issued by a licensed electrical contractor.
Do you service Templestowe, Doncaster and nearby suburbs?
Yes. We service Templestowe Lower (3107), Templestowe, Doncaster, Bulleen, Lower Plenty, Viewbank and surrounding Manningham and Banyule suburbs as part of our regular north east run. If you are unsure whether we cover your location, call 1300 215 193.
Can my EV charger integrate with my solar system?
Yes, if you choose a solar-compatible charger such as the Zappi. It monitors your solar output and charges from surplus solar generation before drawing from the grid. The practical benefit depends on your system size and daily driving pattern. We advise on this during the quote process.
What does a compliant EV charger installation include?
A compliant installation includes a dedicated circuit from the switchboard to the charger, correct RCD or RCBO protection in line with AS/NZS 3000, a correct earth connection, weatherproof installation where required, and a Certificate of Electrical Safety on completion. We include all of this as standard.
Which EV makes and models do you install chargers for?
We install chargers for all EVs sold in Australia: Tesla Model 3 and Model Y, BYD Atto 3 and Seal, Kia EV6, Hyundai Ioniq 5 and 6, MG ZS EV, Volvo EX40, Polestar 2, Mitsubishi Outlander PHEV, Mercedes EQA and EQC, BMW iX and i4, Audi Q4 e-tron, and others.
Do you need to inspect the property before quoting?
We can give a general indication of cost over the phone, but a firm written quote requires us to see your switchboard and confirm the cable route. For most Templestowe Lower properties we can schedule an assessment quickly. Call 1300 215 193 to arrange a time.
Why is Templestowe Lower well suited to home EV charging?
Templestowe Lower has one of the highest owner-occupancy rates in Melbourne's north east — around 80% of homes are owner-occupied. The suburb is car-dependent by design, with Eastern Freeway access making daily driving the norm. Both factors correlate strongly with EV uptake and the decision to invest in home charging infrastructure. We are installing EV chargers in Templestowe Lower regularly and can usually schedule an assessment within a few days of enquiry.