EV Charger Installation Eltham
Switchboard Assessment Included. Lifetime Workmanship Guarantee.
Bitz Electrical installs home and commercial EV chargers throughout Eltham and the surrounding Nillumbik area. Every job comes with a full switchboard assessment, a dedicated circuit and a compliant setup for all major vehicle brands, backed by a written quote before we start and a lifetime workmanship guarantee.

Get a Free Quote
What The Locals Say
EV Charger Installation Eltham
Home EV Charger Installation
A dedicated AC wall charger draws from its own circuit, charges far faster than a standard outlet, and is built for the sustained overnight load an EV places on the system. We assess your property's electrical setup before recommending a charger and handle any switchboard work required as part of the same job.
What's Included in Every Quote
Before recommending a charger we assess your switchboard capacity, supply type and cable route. Most Eltham homes have sufficient capacity and need no upgrade at all. Where a board upgrade is required we include it in the written quote from the start — one job, one visit, no surprises.
Acreage and Larger Block Installations
Eltham's green wedge character means many properties have detached garages, carports set back from the house, or outbuildings at the end of longer driveways. Long cable runs and sub-board installations are setups we handle regularly across Nillumbik. We assess the cable route before quoting and advise on the most practical solution for your layout.
Home EV Charging Speeds: What the Numbers Look Like
The difference between a standard power point and a dedicated wall charger is significant in practice. Here is how the three main options compare for a typical 70kWh battery:
| Charging Method | Output | Charge Time (70kWh Battery) |
|---|---|---|
| Standard power point (10A) | 2.4kW | 24–30 hours |
| 7kW Type 2 wall charger (single phase) | 7kW | 8–10 hours |
| 22kW wall charger (three phase) | 22kW | 3–4 hours |
Most Eltham homes are single-phase, so a 7kW wall charger is the standard recommendation. Properties on larger blocks with three-phase supply can run a 22kW charger and charge in roughly a third of the time. We confirm your supply type as part of every assessment.
Switchboard Assessment Included With Every Quote
An EV charger draws a sustained high load and your switchboard needs to handle it safely. We assess yours as part of every quote at no charge — checking spare capacity, RCD compliance and cable route before recommending anything.
Eltham's housing stock spans several decades, from older homes on larger Rural Conservation Zone blocks to more recent builds closer to the town centre. Boards on older properties commonly have limited spare capacity or missing safety switch protection. We include any required upgrade in the quote from the start. No surprises on the day, no second invoice. We handle both in a single visit.
Do I Need a Switchboard Upgrade for an EV Charger in Eltham?
Not necessarily. Many Eltham homes have modern boards with a spare circuit and sufficient capacity. Older properties on larger blocks are more likely to need attention. We assess this at the quoting stage and give you a clear answer before any commitment is made.
For full details on switchboard upgrades including pricing, process and what to expect, or to learn more about our EV charger installation services across Melbourne's north east, see below.
Ready to Install Your EV Charger in Eltham?
We assess your switchboard, recommend the right charger for your vehicle and property, and complete the full installation in a single visit. Lifetime workmanship guarantee included.
EV Chargers We Install in Eltham
Tesla Wall Connector
Up to 11kW on single-phase. Installed to Tesla's specifications with a dedicated circuit and app integration.
Zappi Solar Charger
The standout choice for solar households. Charges from surplus solar generation rather than drawing from the grid.
Wallbox Pulsar Plus
Compact and reliable. Popular with Kia, Hyundai, MG, Volvo and Polestar owners. App scheduling included.
Evnex
Built for the Australian market. Straightforward home charging with app connectivity and off-peak scheduling.
Universal Type 2 Chargers
Compatible with BYD, Mitsubishi PHEV, Mercedes, BMW, Audi and all other Type 2 vehicles sold in Australia.
Mounting and Installation Options
We install wall-mounted and post-mounted chargers across a range of property types in Eltham. Cable routing is planned before installation starts and we work to minimise visible conduit where the installation allows.
Single and double garages, carports, external walls, detached outbuildings and freestanding post-mounted units for longer driveways are all setups we handle regularly across Nillumbik.
EV Charging and Solar
Solar uptake in Eltham has been strong, driven by the suburb's environmental values, larger roof areas and the economics of self-consumption. Pairing that investment with a solar-compatible EV charger is a natural next step.
A charger such as the Zappi monitors your solar output in real time and charges your vehicle from surplus generation rather than drawing from the grid. We advise on solar integration as part of every quote.
Installation Cost in Eltham
Most residential installations in Eltham fall in the range of $800 to $2,000. The upper end reflects longer cable runs common on larger blocks. The main variables are:
- The charger being installed
- Distance from switchboard to installation point
- Detached garage or outbuilding runs
- Whether a switchboard upgrade is required
- Single-phase or three-phase supply
- Cable access and complexity
The EV Charger Installation Process
Assessment and Quote
We assess your switchboard capacity, available circuits, supply type and cable route and give a straight charger recommendation for your vehicle. You receive a written quote covering all work before anything starts.
Installation
The full job is completed in a single visit where the scope allows: charger mounted, cabling run and connected, switchboard connection made, and circuit protection installed. We work neatly and leave the site clean.
Testing and Handover
We test the charger through a full cycle, confirm circuit protection is working, and walk you through daily operation and off-peak scheduling. A Certificate of Electrical Safety is issued on completion.
Ongoing Support
Our lifetime workmanship guarantee covers the installation. If anything is ever wrong with our work, we come back and fix it. We remain available for questions, faults and follow-up work.
EV Charger Installation Near Eltham
We install EV chargers regularly across Eltham and the surrounding Nillumbik and Banyule corridor. All suburbs below are part of our regular run.
For a full list of suburbs we cover, visit the EV Charger Installation Melbourne page.
Servicing Eltham and the Nillumbik Corridor.
Lifetime workmanship guarantee on every installation. No travel surcharges across Eltham and surrounding suburbs.
Call 1300 215 193
Get a Quote for EV Charger Installation in Eltham
Tell us about your property and vehicle and we will come out, assess your switchboard and installation options, and provide a written quote with no obligation. Most enquiries hear back from us the same day.
Call 1300 215 193or send us a message.
Get a Free Quote
EV Charger Installation Eltham: Frequently Asked Questions
How much does EV charger installation cost in Eltham?
Most residential installations in Eltham fall between $800 and $2,000. The upper end reflects longer cable runs common on larger blocks in this area. The range depends on the charger, distance from the switchboard to the installation point, and whether a switchboard upgrade is required. We give you a written quote covering all work before anything starts. Call 1300 215 193 for a no-obligation assessment.
Do I need a switchboard upgrade before installing an EV charger in Eltham?
Not necessarily. Many Eltham homes have modern boards with a spare circuit and sufficient capacity. Older properties on larger blocks are more likely to need attention. We assess this as part of every quote and include any required work upfront, with no separate invoice and no surprises on the day.
Do I need three-phase power for an EV charger in Eltham?
Usually not. Most Eltham homes run single-phase supply, and a 7kW single-phase charger adds roughly 40km of range per hour, which fills most batteries overnight. Three-phase supply is more common on larger Eltham blocks and on properties with substantial workshop or pool loads, and it allows a 22kW charger that cuts charge times to about a third. Only some vehicles accept 22kW on AC, so we confirm your supply type and your vehicle's limits during the assessment before recommending anything.
What type of EV charger suits an Eltham home?
For most Eltham homes, a 7kW Type 2 wall charger is the right choice. It is compatible with virtually all EVs sold in Australia, delivers a full overnight charge for most vehicles, and works on standard single-phase supply. If your property has three-phase power, which is more common on larger blocks, a 22kW charger charges significantly faster. If you have solar panels, a Zappi is worth a close look. Tell us your vehicle and we will give you a straight recommendation.
Can you install an EV charger in a detached garage or outbuilding in Eltham?
Yes. Detached garages and outbuildings are common in Eltham and we install in these locations regularly. The key considerations are the cable run from the switchboard to the installation point, whether the outbuilding has its own sub-board, and what conduit or trenching is required. We assess all of this before quoting and include it in the written scope.
What size cable and circuit breaker does a 7kW charger need?
A 7kW single-phase charger draws 32 amps, so it is protected by a 32 amp RCBO and typically fed with 6mm squared cable. The exact size depends on run length, installation method and derating factors under AS/NZS 3000. This matters more in Eltham than in most suburbs, because runs to a detached garage or across a large block often need 10mm squared to keep voltage drop within limits. Undersized cable on a long run is one of the most common faults we find on installations done elsewhere.
Does the electricity distributor need to be notified about an EV charger?
Sometimes, and it is a step most homeowners do not know exists. AusNet Services is the distributor across Eltham and the wider Nillumbik shire, and notification or approval may be required before a dedicated charger circuit is energised, particularly where the charger exceeds 7kW or the local supply is constrained. Your electrician handles this, not you. We confirm available supply capacity during the assessment, so there are no surprises once the charger is on the wall.
How long does EV charger installation take?
Most residential installations are completed in a single visit of three to six hours. Properties with longer cable runs, detached garages or switchboard upgrades may require a full day. We give you a clear timeframe as part of the quote.
Which EV charger brands do you install in Eltham?
We install customer-supplied chargers and can supply units directly. Brands we regularly install include Tesla Wall Connectors, Zappi, Evnex, Wallbox, Ocular, ZJ Beny and Fronius Wattpilot. If you have a specific charger in mind, contact us to confirm compatibility with your vehicle and property.
Can I install an EV charger myself in Victoria?
No. EV charger installation is regulated electrical work in Victoria and must be carried out by a licensed electrician. DIY installation is illegal, voids the charger warranty, may void your home insurance, and creates a genuine safety risk given the sustained load involved. A Certificate of Electrical Safety is required on completion and can only be issued by a licensed electrical contractor.
Are you licensed, and what warranty do you offer?
Bitz Electrical is a licensed electrical contractor, REC 31813, and a member of Master Electricians Australia. Jonathan has more than 25 years of experience in the electrical industry. Every installation is backed by our lifetime workmanship guarantee, which covers the work itself for as long as you own the property, and a Certificate of Electrical Safety is issued on completion. The charger hardware carries its own manufacturer warranty, typically three to five years.
Do you service Eltham North, Research and nearby suburbs?
Yes. We service Eltham (3095), Eltham North, Research, Montmorency, Diamond Creek, Greensborough and surrounding Nillumbik suburbs as part of our regular north east run. If you are unsure whether we cover your location, call 1300 215 193.
Can my EV charger integrate with my solar system?
Yes, if you choose a solar-compatible charger such as the Zappi. It monitors your solar output and charges from surplus solar generation before drawing from the grid. Eltham's larger roof areas and strong solar uptake make this particularly worthwhile. We advise on this during the quote process.
What does a compliant EV charger installation include?
A compliant installation includes a dedicated circuit from the switchboard to the charger, correct RCD or RCBO protection in line with AS/NZS 3000, a correct earth connection, weatherproof installation where required, and a Certificate of Electrical Safety on completion. We include all of this as standard.
Which EV makes and models do you install chargers for?
We install chargers for all EVs sold in Australia: Tesla Model 3 and Model Y, BYD Atto 3 and Seal, Kia EV6, Hyundai Ioniq 5 and 6, MG ZS EV, Volvo EX40, Polestar 2, Mitsubishi Outlander PHEV, Mercedes EQA and EQC, BMW iX and i4, Audi Q4 e-tron, and others.
Do you need to inspect the property before quoting?
We can give a general indication of cost over the phone, but a firm written quote requires us to see your switchboard and confirm the cable route. On larger Eltham properties this is particularly important given the potential for longer runs to detached garages or outbuildings. Call 1300 215 193 to arrange an assessment.
Why is Eltham well suited to home EV charging?
Eltham has one of the highest owner-occupancy rates in Melbourne's north east and a professional demographic with above-average household incomes. The suburb's strong environmental values have driven consistent EV adoption, and its larger blocks and established homes make dedicated home charging a practical and worthwhile investment. We are installing EV chargers in Eltham regularly and can typically schedule an assessment within a few days of enquiry.