Data & Network Cabling Doncaster East

Yes. In Australia, any cabling that connects to the telecommunications network must be installed by an ACMA registered cabler. Bitz Electrical is registered and licensed, so your cabling is legal, compliant and covered.

Yes, and on the suburb's large family homes it is our most common request. A single router cannot cover a big home from one end to the other. We run cabling to hardwired access points across the plan and points to the rooms with the heaviest use, so coverage stays strong in every bedroom, the study and the living areas rather than fading past the lounge.

Yes, and in a school-focused suburb like Doncaster East it is worth doing. A hardwired point in each study or bedroom gives kids a fast, stable connection for schoolwork and video lessons that does not drop out mid-class the way Wi-Fi can. We can run points to as many rooms as you like, so several children can be online at once.

Usually, yes. A busy family home running phones, laptops, TVs, consoles and smart devices puts a load on Wi-Fi that a single router cannot handle well. Moving the heavy users, such as the main TV, desktop and work-from-home points, onto hardwired cabling frees up the wireless for everything else, so the whole network feels faster and steadier.

Both look similar, but Cat6A carries a full 10 Gbps across a 100m run while Cat6 only manages 10 Gbps over short distances, dropping to 1 Gbps beyond that. Cat6A also has better shielding against interference. For most homes Cat6 is plenty, but for business networks, Wi-Fi 6 access points or anything you want to last a decade or more, Cat6A is the safer choice.

Copper, such as Cat6 or Cat6A, is the right choice for most points inside a home or office and runs up to 100m. Fibre is used when you need to cover longer distances, link separate buildings or floors, or run a high-speed backbone. Many jobs use both: fibre for the backbone and copper to each outlet. We assess the site and recommend the mix that fits.

It depends on how each room is used. As a guide, we usually run two points behind a television or desk, points at any Wi-Fi access point location, and extra points in a home office or study. It is cheaper to run a few spare points during the initial work than to add them later, so we plan for a little headroom.

Yes. We test every installation with Fluke equipment and provide printed certification, so you have documented proof that each cable meets standard.

Yes, and it is the ideal time. While walls are open during a renovation or extension we can run structured cabling to every room at a fraction of the disruption of retrofitting later. We coordinate with your builder and work in during the rough-in stage so the cabling is concealed in the finished home.

Often the best fix is a hardwired access point rather than another repeater. We run cabling to the right locations and mount access points so coverage is strong and stable, right through to the back bedrooms and study where a single router tends to give out.

A few extra points in an existing home is often a half-day to a day. A full structured cabling job across a large family home usually takes one to two days depending on the number of points and access. We give you a realistic timeframe with your written quote.

Yes. We run the internal cabling and data points that connect to your NBN service, tidy up the lead-in and set up a central point so your network runs cleanly from the connection out to each room.

Yes. All our work is backed by a lifetime workmanship guarantee, so if anything we have installed is ever at fault, we come back and put it right. Where a full certified system is installed, the components can also carry a manufacturer system warranty.

Cabling done by someone who is not registered can be non-compliant, may void insurance, and often has to be redone before it will pass. It can also cause faults and dropouts that are hard to trace. Using a registered cabler means the work is legal, tested and documented from the start.

It depends on the number of points, the cable type and access to the building. We assess the site and provide a written quote before any work begins, with no variations.