Data & Network Cabling Doncaster

Yes. In Australia, any cabling that connects to the telecommunications network must be installed by an ACMA registered cabler. Bitz Electrical is registered and licensed, so your cabling is legal, compliant and covered.

Yes, and it is one of our most common jobs here. The suburb's large homes spread the living areas out, often over more than one level, which is exactly where a single router cannot reach. We run cabling to hardwired access points placed across the home, so coverage stays strong from the front rooms through to the far bedrooms and out to the balcony taking in the view.

Yes. With so much apartment and townhouse living around Westfield Doncaster, this comes up often. We run points to the living areas, bedrooms and any home-office spot, and set up a tidy central point at the modem. In a multi-level apartment or townhouse we can run a point or access point on each level so coverage does not fade between floors. Where a building has body-corporate rules, we work within them.

Yes. Many Doncaster homes step across levels to suit the slope, and linking those levels together is routine for us. We route cabling through roof, wall and subfloor spaces to connect each level back to a central point, so every floor gets the same fast, stable connection rather than the network fading as you move through the house.

Both look similar, but Cat6A carries a full 10 Gbps across a 100m run while Cat6 only manages 10 Gbps over short distances, dropping to 1 Gbps beyond that. Cat6A also has better shielding against interference. For most homes Cat6 is plenty, but for business networks, Wi-Fi 6 access points or anything you want to last a decade or more, Cat6A is the safer choice.

Copper, such as Cat6 or Cat6A, is the right choice for most points inside a home or office and runs up to 100m. Fibre is used when you need to cover longer distances, link separate buildings or floors, or run a high-speed backbone. Many jobs use both: fibre for the backbone and copper to each outlet. We assess the site and recommend the mix that fits.

It depends on how each room is used. As a guide, we usually run two points behind a television or desk, points at any Wi-Fi access point location, and extra points in a home office or study. It is cheaper to run a few spare points during the initial work than to add them later, so we plan for a little headroom.

Yes. We test every installation with Fluke equipment and provide printed certification, so you have documented proof that each cable meets standard.

Yes. We run hardwired points to the study or office so your connection is fast and stable for video calls and large files, rather than relying on Wi-Fi that fades across a large home or between apartment levels. We can also add a point for a printer or a second screen.

A few extra points in an existing home is often a half-day to a day. A full structured cabling job across a large multi-level home usually takes one to two days depending on access and the number of points. Apartments and townhouses are often quicker. We give you a realistic timeframe with your written quote.

Yes. We run the internal cabling and data points that connect to your NBN service, tidy up the lead-in and set up a central point so your network runs cleanly from the connection out to each room.

Yes. All our work is backed by a lifetime workmanship guarantee, so if anything we have installed is ever at fault, we come back and put it right. Where a full certified system is installed, the components can also carry a manufacturer system warranty.

Cabling done by someone who is not registered can be non-compliant, may void insurance, and often has to be redone before it will pass. It can also cause faults and dropouts that are hard to trace. Using a registered cabler means the work is legal, tested and documented from the start.

It depends on the number of points, the cable type and access to the building. We assess the site and provide a written quote before any work begins, with no variations.